Supero Nuvoton WPCM450, Руководство пользователя

Страница: 27 / 67

Chapter 2: Configuring BMC/IPMI Settings
2-17
To modify an alert, enter the information needed for the following items:
•
Alert Type: This item allows you to specify the alert type. You can select SNMP
Type or Email from the pop-up menu. For further guidance on typical inquiries
relating to SNMP, see the table below.
Item Answer
SNMP version number SNMP version 2.
MIB community name A community name is not required since
SNMP version 2 only uses traps.
MIB file location Go to http://www.supermicro.com/products/
nfo/IPMI.cfm and click “IPMI MIB (AMI)”
(right-hand side of the page).
The IPMI item you need to con-
figure so the SNMP manager
can receive the SNMP trap The alert LAN destination address (see #4
under 2.4.1) must be set to the same IP in
as the SNMP manager.
Can I query for detailed infor-
mation on the MIB "Event" trap
items? Detailed queries are not possible because
event mapping is based only on sensor
type, event type, and sensor offset.
A list of trap items generated for
my platform No standard list of event traps exist be-
cause the PEF (Platform Event Filter) table
is OEM customizable.
•
Event Severity: This item allows you to decide how to classify or label an alert
according to the seriousness of the alert. You can choose an item from the
pop-up menu to categorize the alert: Disable All, Informational, Warning, Critical
or Non-recoverable.
•
Destination IP: This item allows you to specify the IP address of the server you
want to send your alert to.
•
Email Address: This item allows you to specify the e-mail address that you want
to send your alert to.
After entering the information in the fields, press <Save> to save the information
you've entered or press <Cancel> to cancel it.
Note: To set up an email alert, please enter the IP address of your mail
server in the SMTP (Simple Mail Transfer Protocol.)