Supero Nuvoton WPCM450, Руководство пользователя

Страница: 15 / 67

Chapter 2: Configuring BMC/IPMI Settings
2-5
Accessing the Baseboard Management Controller
1. Connect a LAN cable to the onboard LAN1 port or the dedicated IPMI LAN
port.
2. Choose a computer connected to the same network and open the IPMIView
utility.
3. Go to File>New>System. Enter System Name, IP Address of LAN1 or the
dedicated LAN, Description in the appropriate fields and press <Enter>.
4. Select the system from the IPMI Domain. Enter the Login ID and Password in
the appropriate fields to login to the IPMIView utility.
Using the Internet Browser
1. Connect a LAN cable to the onboard LAN1 port or the dedicated IPMI LAN
port.
2. Choose a computer that is connected to the same network and open the
browser.
3. Enter the IP address of each server that you want to connect to in the ad-
dress bar in your browser.
4. Once your machine is connected to the remote server, the Log-In screen as
shown on the next page will display.
Note 1:
If you wish to use the IPMI-dedicated LAN port for your network
connections, be sure to connect an RJ45 cable to your dedicated LAN port
before you activate the BMC (at first power-on or cold reset). Otherwise,
the BMC will look for a shared LAN port to connect to if the IPMI-dedicated
LAN cable is not detected upon BMC activation.
Note 2: However, if you should decide to use the IPMI-dedicated LAN port
for a network connection, please perform a BMC cold reset or power cycle
reset for the dedicated LAN to be detected.