Supero MicroCloud 5038ML-H8TRF, Руководство пользователя

Страница: 79 / 122

Chapter 6: Advanced Chassis Setup
6-11
6-6 Removing and Installing Motherboard Nodes
Figure 6-10. Removing Nodes from the System
Release Tab
Node Power LED
Node Power Button
Node Handle
The SC938BH-R1620B chassis comes equipped with eight removable nodes, each
one containing an individual motherboard. Removing these nodes will also power-
down the corresponding hard drives. See the table in Section 6-3 to determine which
hard drives are controlled by each node.
Removing Nodes from the System
1. Power-down the individual node by pressing that node's power button.
2. Press and hold down the release tab on the back of the node.
3. Using the node's handle, pull the node from the chassis.
Warning: Except for short periods of time while swapping nodes, do not operate the
server with the node bays empty. In the unlikely event of a node failure, remove the
failed node and replace it with the dummy node that was included with the system..