Supero H8QGL-6F+, Руководство пользователя

Страница: 56 / 84

3-4
H8QGL-6/iF+ SERVERBOARD USER'S MANUAL
Use the procedures below to fl ash from a BIOS fl ash fl oppy or USB disk.
For <fi lename>.exe
1. Run the <fi lename>.exe fi le under Windows to create the BIOS fl ash fl oppy
disk.
2. Insert the fl oppy, into the system for which you wish to fl ash the BIOS.
3. Boot up the system for which you wish to fl ash the BIOS.
4. The BIOS utility will run automatically and begin fl ashing the BIOS WITHOUT
any prompts.
5. After the BIOS completes the fl ashes, system will reboot or needs manually
reboot.
6. It will show "CMOS Checksum Error" on the POST, press F1 key to boot into
BIOS setup page.
7. Hit F9 Key to load optimal default setting, and change other BIOS setting if
you needed.
8. Hit F10 to save the BIOS setting and system reboots.
For <fi lename>.zip
1. Prepare a DOS or 98 bootable USB disk.
2. Extract <fi lename>.zip fi le under Windows into the USB disk.
3. Boot up system for which BIOS will be fl ashed from 98 bootable USB disk.
4. At the prompt, type: [fl ash H8xxxxx.xxx] and hit enter.
5. After the BIOS completes the fl ashes, system will reboot or needs manually
reboot
6. It will show "CMOS Checksum Error" on the POST, press F1 key to boot into
BIOS setup page.
Warning: Flashing the wrong BIOS can cause harm to the system.
7. Hit F9 Key to load optimal default setting, and change other BIOS setting if
you needed.
8. Hit F10 to save the BIOS setting and system reboots.
Question: What's on the CD that came with my motherboard?
Answer: The supplied compact disc has quite a few drivers and programs that will
greatly enhance your system. We recommend that you review the CD and install the
applications you need. Applications on the CD include chipset drivers for Windows
and security and audio drivers.