
H8QGL-6/iF+ SERVERBOARD USER'S MANUAL
2-8
2. Install to slots CPU1/DIMM1A, CPU1/DIMM2A, CPU1/DIMM3A and CPU1/
DIMM4A, etc. Always install in groups of four and in the numerical order of
the DIMM slots. See support information below.
3. Gently press down on the memory module until it snaps into place.
4. With four DIMMs installed, repeat step 2 to populate the CPU2 DIMM
slots. Always install four DIMMs to both CPU DIMM slots for more effi cient
operation.
Note:
1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size memory modules are
supported. It is highly recommended that you remove the power cord from the
system before installing or changing memory modules. Please refer to our web site
for memory that has been tested on the H8QGL-6/iF+ serverboard.
Memory Support
The H8QGL-6/iF+ serverboard supports single/dual/tri/quad-channel,
DDR3-1866/1600/1333/1066 Mhz speed registered ECC/Unbuffered ECC/non-
ECC SDRAM.
Populating four adjacent slots at a time with memory modules of the same size and
type will result in interleaved (128-bit) memory, which is faster than non-interleaved
(64-bit) memory.
Maximum Memory
The H8QGL-6/iF+ serverboard supports up to 512 GB of registered ECC RDIMM/
LRDIMM or 128 GB of Unbuffered ECC/non-ECC UDIMM SDRAM in 16 slots.
Figure 5-3. Installing DIMM into Slot
To I n s t a l l :
I n s e r t
module vertically and
press down until it
s n a p s i n t o p l a c e .
Pay attention to the
alignment notch at
the bottom.
To R e m o v e :
U s e
your thumbs to gently
push the release tabs
near both ends of the
module. This should
release it from the
slot.
Top View of DDR3 Slot
Release Tab
Release Tab
Note:
Notch should align with
the receptive key point on
the slot.
Notch
Notch
Front View
Содержание H8QGL-6F+
Страница 1: ...USER S MANUAL Revision 1 1b SUPER H8QGL 6F H8QGL iF...
Страница 58: ...3 6 H8QGL 6 iF SERVERBOARD USER S MANUAL Notes...
Страница 76: ...4 18 H8QGL 6 iF SERVERBOARD USER S MANUAL Notes...
Страница 78: ...A 2 H8QGL 6 iF SERVERBOARD USER S MANUAL Notes...