Supero FatTwin F627R3-R72B+, Руководство пользователя

Страница: 102 / 152

6-18
FatTwin F627R3-RTB+/R72B+ User's Manual
Figure 6-15: Installing a Rear Low-Profi le Expansion Card
PCIE Slot
Expansion Card
Mounting Screw
SCF424 PCIE Slot Confi gurations
Some SCF424AS chassis models support one or more expansion cards in the
PCIE slots of each node, Refer to the tables below to determine the PCIE slot
confi guration for your particular chassis.
SCF424AS-R1K28BP
Front of Node Rear of Node
Six 3.5" HDDs
One Micro LP slot
One low-profi le PCIE slot
Two 3.5" HDDs
Installing a Rear Low-Profi le Expansion Card
Each motherboard node supports one low-profi le expansion card.
Installing an Expansion Card into a Node
1. Power down the system and remove the power cord from the rear of the
power supply as described in Section 6-3. Remove the node from the chassis
as described in Section 6-4 and place the node on a fl at, stable surface.
Remove the cover from the node as described in Section 6-6.
2. Remove the mounting screw which secures the PCIE slot cover in the PCIE
slot and set this aside for later use.
3. Remove the PCIE slot cover by sliding it upward and out of the PCIE slot.
4. Simultaneously slide the expansion card into the PCIE slot, while inserting it
into the motherboard.
5. Secure the expansion card into the PCIE slot using the screw which was
previously set aside.