Supero C7Z370-CG-IW, Руководство пользователя

Страница: 114 / 142

4-46
Supermicro C7Z370-CG-IW Motherboard User’s Manual
SATA Controllers
Select Disabled to disable the onboard SATA Controllers. The options are
Disabled or
Enabled .
SATA Mode Selection
This feature selects the mode for the installed SATA drives. The options
are
AHCI or Intel RST Premium With Intel Optane System Acceleration.
SATA Controller Speed
Use this feature to specify the maximum speed the SATA controller can
support. The options are
Default , Gen 1, Gen 2, and Gen 3.
SATA Frozen
Select Disabled to disable the Freeze Lock Security feature. The options
are Disabled or
Enabled .
M.2-M2
Hot Plug
This feature designates the port specified for hot plugging. Set this item
to Enabled for hot-plugging support, which will allow the user to replace
a SATA disk drive without shutting down the system. The options are
Disabled or Enabled.
Configured as eSATA
This item dispays the eSATA status for the detected hard drive.
Spin Up Device
When this option is disabled, all drives will spin up at boot. When this
option is enabled, it will perform Staggered Spin Up on any drive this
option is activated. The options are
Disabled or Enabled.
SATA Device Type
Select Hard Disk Drive or Solid State Drive.
*The remaining options in the section are similar across Serial ATA Ports
0 through 5.
Serial ATA Port 0~5
This feature dispays the detected SATA drive, if any.