Supero C7B360-CB-ML, Руководство пользователя

Страница: 89 / 113

4-24
Supermicro C7B360-CB-ML Motherboard User’s Manual
ASPM20
This feature enables the control of Active State Power Management
(ASPM) of PCH Slot5 . The options are Disabled, L0s, L1, L0sL1, and Auto .
L1 Substates
This feature controls the L1 substates settings for PCH Slot5 . The options
are Disabled, L1.1, and "L1.1&L1.2".

SATA and RST Configuration
SATA Controller(s)
This feature enables SATA device(s). The options are Disabled or Enabled .
SATA Mode Selection
This feature controls the SATA mode. The options are AHCI or Intel RST
With Intel Optane System Acceleration.
RAID Mode Selection
This feature is only available when "SATA Mode Selection" is set to Intel
RST With Optane System Acceleration. The options are
iRST Mode or
Alternate.
Aggressive LPM Support
This feature enables the PCH to aggressively enter link power state. The
options are Disabled or
Enabled .
Storage Option ROM/UEFI Driver
This feature controls the execution of UEFI and Legacy Storage OpROM.
The options are Do not launch, UEFI, and
Legacy .
Serial ATA Port 0~5
Hot Plug
This feature designates the port specified for hot plugging. Set this fea -
ture to Enabled for hot-plugging support, which will allow the user to
replace a SATA disk drive without shutting down the system. The options
are
Disabled or Enabled.
Spin Up Device
When this feature is disabled, all drives will spin up at boot. When this
option is enabled, it will perform Staggered Spin Up on any drive this
option is activated. The settings are
Disabled or Enabled.