3-3
Safety Information and Technical Specifications
Select Yes, and then click Enter to restart the computer.
13.
Continue with
14.
Making Your Array Bootable
.
Creating an Array with Adaptec Storage Manager
This section details how to use the Adaptec Storage Manager configuration wizard.
The Adaptec Storage Manager Install CD is required.
Creating a RAID 1 array:
Restart the computer with the Adaptec Storage Manager Installation CD in the
1.
CD drive.
Select your language, then click Enter.
2.
After reviewing the license, click Enter.
3.
Click Launch Configuration Utility.
4.
Click the Create button. This opens the Configuration Wizard.
5.
Select "ExClick configuration..." and click the Next button.
6.
Review the information that is displayed. Notice that for this example, Adaptec
7.
Storage Manager used 13 disk drives to create one logical drive and one hot
spare.
Note:
In DAS environments, Adaptec Storage Manager refers to arrays "logi-
cal drives".
If you want to make changes use the Modify logical devices settings.
Click Apply to build the logical drives and save the Adaptec controller.
8.
You must partition and format the logical drives. The logical drive appears as
9.
one drive on the operating system.
Click Reboot to restart.
10.
Remove the Adaptec Storage Manager Installation CD and go to the next
11.
section.
Содержание AOC-USASLP-S8i
Страница 1: ...DESIGNED IN USA Rev 1 0d AOC USASLP S8i AOC USASLP S8iR USER S GUIDE SUPER...
Страница 8: ...viii Add on Card User s Guide Notes...
Страница 22: ...4 4 Add on Card User s Guide Notes...
Страница 28: ...6 4 Add on Card User s Guide Notes...