3-2
Add-on Card User's Guide
Creating an Array with the ACU
Before starting, backup data on your hard disk before beginning. Initializing disks
erases data.
Creating a RAID 1 array:
Confirm that your Turn on your computer
1.
When asked, click Ctrl+A to use the ACU utility. If necessary, select your con-
2.
troller from the list of controllers (if you have multiple controllers of the same
type), and then click the Enter button.
Select Array Configuration Utility, and then click the Enter button.
3.
Select Initialize Drives, then click Enter.
4.
Select at least three disk drives for the array and do the following:
5.
5a. Click Insert for each selected disk drive
5b. Click Enter.
Click Y, and then click Enter.
6.
Select Create Array, and then click Enter.
7.
Select the disk drives that were just initialized, click Insert for each selected
8.
disk drive, then click Enter.
At the Array Properties screen opens, use the following settings:
9.
9a. Array Type: Select RAID 1 and click Enter
9b. Array Label: Enter a name the array and click Enter
9c. Array Size: Press Enter twice to use the default GB granularity.
9d. Stripe Size: Click Enter to use the default (256 K)
9e. Read Caching: Click Enter to use the default (Yes)
9f. Write Caching: Click Enter to Enable Always
9g. Create RAID via: Click Enter to choose Build/Verify
If necessary, at the cache warning message, type Y for Yes.
10.
After the successful creation of the array, click any key to return to the ACU
11.
Menu. The array is immediately available but is reduced until the build pro-
cess is finished
Click the Esc key until the Exit utility window appears.
12.
Содержание AOC-USASLP-S8i
Страница 1: ...DESIGNED IN USA Rev 1 0d AOC USASLP S8i AOC USASLP S8iR USER S GUIDE SUPER...
Страница 8: ...viii Add on Card User s Guide Notes...
Страница 22: ...4 4 Add on Card User s Guide Notes...
Страница 28: ...6 4 Add on Card User s Guide Notes...
