Supero AOC-USASLP-S8i, Руководство пользователя

Страница: 13 / 28

2-3
Safety Information and Technical Specifications
2-3 Front Jumper Locations and Pin Definitions
Explanation of Jumpers
To modify the operation of the backplane,
jumpers can be used to choose between
optional settings. Jumpers create shorts
between two pins to change the function
of the connector. Pin 1 is identified with
a square solder pad on the printed circuit
board. Note: On two pin jumpers, "Closed"
means the jumper is on and "Open" means
the jumper is off the pins.
Connector
Pins
Jumper
Setting
2 1
2 1
Jumper Settings
Jumper Jumper Settings Note
Flash Enable Open = Disable
Closed = Enabled
Enabled allows qualified technician
to reprogram the Flash EE Prom and
update the chip firmware
For normal operation, leave this
jumper open.
FLASH EN
DESIGNED IN USA