Supero 6047R-E1R24L, Руководство пользователя

Страница: 11 / 115

1-3
Chapter 1: Introduction
1-3 Server Chassis Features
The following is a general outline of the main features of the SC846E16-R920B
server chassis.
System Power
The SC846E16-R920B features a redundant (two separate power modules) 920W
high-effi ciency power supply with I
2
C. This power redundancy feature allows you to
replace a failed power supply without shutting down the system.
Hard Drives
The SC846E16-R920B chassis was designed to support 24 dual-channel SATA
hard drives, which are hot-swappable units. 2x 2.5" rear mounted hot-swap drive
bays are available as an option for use with the onboard SATA controller (MCP-
220-84606-0N)
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SATA drives.
Front Control Panel
The control panel on the SuperServer 6047R-E1R24L provides you with system
monitoring and control. LEDs indicate system power, HDD activity, network activ-
ity, system overheat/fan fail and power supply failure. A main power button and a
system reset button are also included. In addition, two USB ports and a COM port
have been incorporated into the front of the chassis for convenient access.
Cooling System
The SC846E16-R920B chassis includes three 8-cm hot-plug system cooling fans
located in the middle section of the chassis. An air shroud channels the airfl ow from
the system fans to effi ciently cool the processors and memory. Two additional 8-cm
fans are located at the back of the chassis to expel hot air from the system. Each
power supply module also includes a cooling fan.