Supero 4042G-72RF4, Руководство пользователя

Страница: 110 / 122

7-12
A+ SERVER 4042G-72RF4 USER'S MANUAL
Redirection After BIOS POST
Options are Disable (no redirection after BIOS POST), Boot Loader (redirection
during POST and during boot loader) and
Always
(redirection always active).
Note that some OS's may not work with this set to Always.
Terminal Type
Selects the type of the target terminal. Options are ANSI , VT100 and VT-UTF8.
VT-UTF8 Combo Key Support
Allows you to Enable or Disable VT-UTF8 combination key support for ANSI/
VT100 terminals.
Sredir Memory Display Delay
Use this setting to set the delay in seconds to display memory information.
Options are
No Delay , 1 sec, 2 secs and 4 secs.

Hardware Health Configuration
CPU Overheat Alarm
This setting allows you to specify the type of alarm for CPU overheating. Options
include The Early Alarm and
The Default Alarm .
Other items in the submenu are systems monitor displays for the following
information:
CPU1 ~ CPU4 Temperature, System Temperature, Fan 1-9 Reading, Chipset
FAN1-2, CPU1 ~ CPU4 VCore, CPU1~4 DIMM Voltage, SR56x0 1.1V, +5V,
+12V, 3.3Vcc, 3.3Vsb, Vbat.
CPU Temperature Display (CTD)
CPU Temperature descriptions are defined as:
Low

[Tctl Value = Lowest Value, Tctl Value = -45]
Medium

[Tctl Value = -46, Tctl Value = 60]
High

[Tctl Value = -61 and Above]
Note: Only CPU temperature (Low, Medium, High) and system temperature (RT1)
are required to be displayed in BIOS and in-system monitoring software. Other
Motherboard components such as memory, chipset, SAS and 10Gb controllers,
and others are not requried to display temperatures. For debugging and testing
purposes, BIOS and system monitoring software can show motherboard
components’ temperatures (such as memory, chipset, SAS and 10Gb controllers).