Supero 2027R-WRF, Руководство пользователя

Страница: 96 / 132

6-12
SUPERSERVER 2027R-WRF USER'S MANUAL
6-7 Power Supply
The SC213 chassis has two redundant 740 Watt power supplies. The power
modules are hot-swappable, enabling the power supplies to be changed without
powering down the system. These power supplies are auto-switching capable,
which enables the power supply to automatically sense and operate at a 100v to
240v input voltage. An amber light will be illuminated on the power supply when the
power is off. An illuminated green light indicates that the power supply is operating.
Changing the Power Supply
1. Determine which power supply needs to be replaced and unplug the power
cord to that module.
2. Push the release tab (on the back of the power supply) as illustrated to
release the power module from the chassis (Figure 6-10).
3. While holding down the release tab, pull the power supply out using the
handle provided on the power module.
4. Replace the failed power module with the same model power supply.
5. Push the new power supply module into the power bay until the tab clicks into
the locked position.
6. Plug the AC power cord back into the module and the replacment power
module will automatically power-up.
Figure 6-10: Removing the Power Supply
Release Tab