Supero 2027R-WRF, Руководство пользователя

Страница: 92 / 132

6-8
SUPERSERVER 2027R-WRF USER'S MANUAL
Installing a Hard Drive into a Drive Carrier
1. Insert a drive into the carrier with the PCB side facing down and the
connector end toward the rear of the carrier.
2. Align the drive in the carrier so that the screw holes of both line up. Note that
there are holes in the carrier marked “SATA” to aid in correct installation.
3. Secure the drive to the carrier with four screws as illustrated below in Figure
6-6.
Figure 6-6: Installing a Hard Drive into a Carrier
4. Insert the drive carrier into its bay, keeping the carrier oriented so that the
hard drive is on the top of the carrier and the release button is on the right
side. When the carrier reaches the rear of the bay, the release handle will
retract (Figure 6-7).
Figure 6-7: Proper Installation of the Hard Drive into the Hard Drive Bay
5. Push the handle in until it clicks into its locked position