Supero 2027R-N3RF4+, Руководство пользователя

Страница: 105 / 110

A-1
Appendix A: BIOS Error Beep Codes
Appendix A
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up
procedure. If a fatal error occurs, you should consult with your system manufacturer
for possible repairs.
These fatal errors are usually communicated through a series of audible beeps. The
numbers on the fatal error list (on the following page) correspond to the number
of beeps for the corresponding error. All errors listed, with the exception of Beep
Code 8, are fatal errors.
Beep Code Error
Message
Description
1 beep Refresh Circuits have been reset (Ready to power up)
5 short beeps
and 1 long
beep
Memory error No memory detected in the system
5 beeps No Con-In
or Con-Out
devices
Con-In includes USB or PS/2 keyboard, PCI or
serial console redirection, IPMI KVM or SOL.
Con-Out includes video controller, PCI or serial
console redirection, IPMI SOL.