manualshive.com logo in svg

Supero 1042G-TF, Руководство пользователя, Страница: 31 / 118

Поделиться
Скачать
Supero 1042G-TF Скачать руководство пользователя страница 31

Chapter 3: System Interface

3-3

3-4  SATA Drive Carrier LEDs

• 

Green:

 Each Serial ATA drive carrier has a green LED. When illuminated, this 

green LED (on the front of the SATA drive carrier) indicates drive activity. A 
connection to the SATA backplane enables this LED to blink on and off when 
that particular drive is being accessed. Please refer to Chapter 6 for instructions 
on replacing failed SATA drives.

• 

Red:

 The red LED to indicate an SATA drive failure. If one of the SATA drives 

fail, you should be notified by your system management software. Please refer 

to Chapter 6 for instructions on replacing failed SATA drives.

HDD

This light indicates SATA and/or DVD-ROM drive activity when flashing.

Power

Indicates power is being supplied to the system's power supply units. This LED 
should normally be illuminated when the system is operating.

Содержание 1042G-TF























































































































Отзывы:

Нет отзывов