Supero 1027R-72BRFTP, Руководство пользователя

Страница: 65 / 130

Chapter 5: Advanced Serverboard Setup
5-19
Standby Power Header
The Standby Power header is located
at JSTBY1 on the motherboard. See
the table on the right for pin defini -
tions. (You must also have a cable to
use this feature.)
Standby PWR
Pin Definitions
Pin# Definition
1 +5V Standby
2 Ground
3 Wake-up
T-SGPIO/S-SGPIO Headers
Three Serial-Link General Purpose
Input/Output headers are located at
T-SGPIO 1/2 and S-SGPIO 1 on the
motherboard. T-SPGIO 1/2 support
I-SATA 0~5, and S-SGPIO 1 supports
S-SATA 0-3 connections. See the
table on the right for pin definitions.
Note:
NC= No Connection
T-SGPIO/S-SGPIO
Pin Definitions
Pin# Definition Pin Definition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 Clock 8 NC
Power SMB (I
2
C) Connector
Power System Management Bus (I
2
C)
Connector (JPI
2
C1) monitors power
supply, fan and system temperatures.
See the table on the right for pin
definitions.
PWR SMB
Pin Definitions
Pin# Definition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 +3.3V
IPMB
A System Management Bus header
for IPMI 2.0 is located at JIPMB1.
Connect the appropriate cable here
to use the IPMB I
2
C connection on
your system.
IPMB Header
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection