Supero 1027R-72BRFTP, Руководство пользователя

Страница: 125 / 130

A-1
Appendix A: BIOS Error Beep Codes
Appendix A
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed at each
system boot, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue to
boot. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue with bootup procedure. If a
fatal error occurs, you should consult with your system manufacturer for possible
repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error.
BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Circuits have been reset.
(Ready to power up)
5 short beeps + 1 long
beep
Memory error No memory detected in the
system
5 long beeps + 2 short
beeps
Display memory
read/write error
Video adapter missing or with
faulty memory
5 beeps No Con-In or No
Con-Out devices
Con-In: USB or PS/2 key-
board, PCI or Serial Console
Redirection, IPMI KVM or
SOL
Con-Out: Video Controller,
PCI or Serial Console Redi-
rection, IPMI SOL
1 beep per device Refresh 1 beep for each USB device
X9 IPMI Error Codes
1 continuous beep System overheat System overheat