Supero 1027R-72BRFTP, Руководство пользователя

Страница: 11 / 130

1-3
Chapter 1: Introduction
1-3 Server Chassis Features
The 1027R-72BRFTP is built upon the SC119XTQ-R700WB chassis. Details on
the chassis and on servicing procedures can be found in Chapter 6.The following
is a general outline of the main features of the chassis.
System Power
The SC119XTQ-R700WB features two redundant 700W power supplies. The sys-
tem does not need to be shut down when replacing or removing a single power
supply module. The system also has two Battery Backup Power units.
Hard Drives
The chassis was designed to support eight hot-swap SAS or SATA hard drives.
PCI Expansion Slots
Two riser cards are included. The RSC-R1UW-E8R is located on the right side of the
chassis and supports one low-profile (max. length = 4.1") PCI-E x8 card. The RSC-
R1UW-2E16 is located on the left side of the chassis and supports two full-height,
half-length PCI-E x16 add-on cards. See section 5-6 of this manual for details.
Front Control Panel
The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (2), system information and
UID (Unit Identification). A main power button and a UID button is also included.
Cooling System
The system has an innovative cooling design that features six sets of 4-cm counter-
rotating fans located in the middle section of the chassis. Fan speed may be varied
by IPMI to respond to fluctuations in system temperature. The power supply module
also includes a cooling fan.