Supermicro X6DLP-4G2, Руководство пользователя

Страница: 25 / 106

Chapter 2: Installation
2-5
1. Using a Phillips Screw Driver to unscrew and
remove the heatsink screws from the mother-
board in the sequence as show in the picture
on the right.
2. Hold the heatsink as show in the picture
on the right and gently wriggle the heatsink to
loosen it from the CPU. (Do not use excessive
force when wriggling the heatsink!!)
3. Once the heatsink is loosened, remove the
heatsink from the CPU.
4. Clean the surface of the CPU and the
heatsink to get rid of the old thermal grease.
Reapply the proper amount of thermal grease
on the surface before you re-install the CPU
and the heatsink.
To Un-install the Heatsink
Screw#1
Screw#2
Mounting the Motherboard in the Chassis
All motherboards have standard mounting holes to fi t different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Make sure that the metal standoffs click in or are screwed in tightly.
Then, use a screwdriver to secure the motherboard onto the motherboard tray.
( *Note : some components are very close to the mounting holes. Please take
precautionary measures to prevent damage to these components when installing
the motherboard to the chassis.)