Supermicro X6DHP-3G2, Руководство пользователя

Страница: 84 / 96

B-10
X6DHP-3G2 User's Manual
Initializing Disk Drives
If an installed disk does not appear in the disk selection list for creating a new ar-
ray, or if it appears grayed out, you may have to initialize it before you can use it as
part of an array. Drives attached to the controller must be initialized before they can
be used in an array.
Caution: Initializing a disk overwrites the partition table on the disk and makes any
data on the disk inaccessible. If the drive is used in an array, you may not be able
to use the array again.
Do not initialize a disk that is part of a boot array. To determine which disks are
associated with a particular array, Please refer to Viewing Array Properties.
To initialize drives:
1. Turn on your computer and press Ctrl+A when prompted to access the Adaptec
RAID Confi guration utility.
2. From the Adaptec RAID Confi guration Utility menu, select Array Confi guration
Utility (as shown in the screen below).