Supermicro X6DHP-3G2, Руководство пользователя

Страница: 3 / 96

iii
Preface
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of
the X6DHP-3G2 motherboard. The X6DHP-3G2 supports single or dual
Intel
®
Xeon 64-bit processors at a 800 MHz front side bus. Based on Intel's Xeon
EM64T Processor (800 MHz) and the E7520 chipset, the X6DHP-3G2 supports
Intel's Hyper- Threading Technology (HT) , the EM64T Technology, the Enhanced
Intel SpeedStep Technology (EIST) and is ideal for high performance server envi-
ronments with up to two processors on one system bus. The X6DHP-3G2
motherboard is intended to be professionally installed.
Manual Organization:
Chapter 1 describes the features, specifi cations and performance of the mainboard
and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when
installing the processor, memory modules and other hardware components into
the system. If you encounter any problems, see Chapter 3 , which describes
troubleshooting procedures for the video, the memory and the system setup stored
in CMOS.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A provides BIOS POST Messages.
Appendix B lists BIOS POST Codes.
Appendix C lists Software Installation Instructions.
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent
catastrophic system failure or to avoid bodily injury.
Warning: Important information given to ensure proper system installation
or to prevent damage to the components.
(*Note): Note: Additional Information given to differentiate various models or
to ensure correct system setup.