Supermicro X6DHP-3G2, Руководство пользователя

Страница: 20 / 96

2-2
X6DHP-3G2 User's Manual
2-2 Processor and Heatsink Installation
!
IMPORTANT: Always connect the power cord last and always remove it before add-
ing, removing or changing any hardware components. Make sure that you install
the processor into the CPU socket before you install the CPU heat sink.
When handling the processor package, avoid placing direct pressure
on the label area of the fan. Also, do not place the motherboard on a
conductive surface, which can damage the BIOS battery and prevent
the system from booting up.
Socket lever
CPU Installation
1. Lift the lever on the CPU socket: lift
the lever completely as shown on the
picture on the right; otherwise, you
will damage the CPU socket when
power is applied . (Install CPU1 fi rst.)
Pin 1
2. Insert the CPU in the socket, mak-
ing sure that pin 1 of the CPU aligns
with pin 1 of the socket (both corners
are marked with a triangle). When
using only one CPU, install it into CPU
socket #1 (socket #2 is automatically
disabled if only one CPU is used).
3. Press the lever down until you
hear the *click* so you can be
sure that the CPU is securely
installed in the CPU socket.
Socket lever in the
locking Position