C-8
X6DH8-G/X6DHE-G User's Manual
5 Press Enter when both disks for the new array are selected. The Array
Properties menu displays (as the screen shown below).
Assigning Array Properties
Once you've create a new array, you are ready to assign the properties to
the array. *Caution: Once the array is created and its properties are as-
signed,
you cannot change the array properties using the ACU. You will need to
use the Adaptec Storage Manager - Browser Edition. (Refer to Adaptec's
User's Guide in the enclosed CD.)
To assign properties to the new array:
1. In the Array Properties menu (as shown in the screen below), select an
array type and press Enter.
Note that only the available array types: RAID 0, and RAID1, are displayed
on the screen. (*RAID 0 or RAID 1 requires two drives.)
Содержание X6DH8-G
