Supermicro X12DAi-N6, Руководство пользователя

Страница: 35 / 168

35
Chapter 2: Installation
1. Align peek nut "A", which is next to the triangle (Pin 1) on the heatsink, against threaded
fastener "a" on the CPU socket. Then align peek nuts "B", "C", and "D" on the heatsink
against threaded fasteners "b", "c", and "d" on the CPU socket, making sure that
all peek nuts on the heatsink are properly aligned with the corresponding threaded
fasteners on the CPU socket.
2. Once they are aligned, gently place the heatsink on top of the CPU socket, making sure
that each peek nut is properly attached to its corresponding threaded fastener.
Installing the Processor Heatsink Module (PHM)
a, b, c, d:
Threaded Fastener on the CPU socket
A, B, C, D:
Peek Nut on the Heat-
sink
A
B
C
D
a
b
c
d
Rotating Wire
Rotating Wire
Latched State
Top View
3. Press all four rotating wires outwards and make sure that the heatsink is securely
latched unto the CPU socket.