36
Chapter 3: Maintenance and Component Installation
Power Supply
The 530T-I chassis includes a 400W power supply. The power supply has the capability to
automatically sense and operate with an input voltage of 100-240V AC.
If it becomes necessary to replace the power supply, follow the instructions below.
Replacing the Power Supply
Begin by removing power from the system as described in section 3.1 and access the inside
of the system as described in section 3.2.
1. Remove the screws securing the power supply to the chassis. These are located on the
rear of the chassis. Set these screws aside for later use.
2. Gently lift the power supply out of the chassis.
3. Replace the failed power supply with an identical power supply model.
4. Secure the new power supply using the screws previously set aside.
5. Reconnect the power cables to the motherboard.
6.
Plug the AC power cord back into the power module.
7. Finish by replacing the chassis left cover and then restoring power to the system.