manualshive.com logo in svg

Supermicro SuperWorkstation 5039A-I, Руководство пользователя

Поделиться
Скачать
Supermicro SuperWorkstation 5039A-I Скачать руководство пользователя страница 81

Chapter 6: BIOS

81

Discard Changes

Select this option and press <Enter> to discard all the changes and return to the AMI BIOS 
utility Program. 

Default Options

Restore Defaults

To set this feature, select Restore Optimized Defaults from the Save & Exit menu and press 
<Enter>. These are factory settings designed for maximum system stability, but not for 
maximum performance.

Save As User Defaults

To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This 
enables the user to save any changes to the BIOS setup for future use.

Restore User Defaults

To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use 

this feature to retrieve user-defined settings that were saved previously.

Boot Override

This feature allows the user to override the Boot priorities sequence in the Boot menu, and 

immediately boot the system with a device specified by the user instead of the one specified 

in the boot list. This is a one-time override.

Launch EFI Shell from filesystem device.

Attempts  to  Launch  EFI  Shell  application  (Shell.efi)  from  one  of  the  available  file  system 

devices.

Содержание SuperWorkstation 5039A-I
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды