Supermicro SuperStorage SSG-1129P-ACR10N4L Скачать руководство пользователя

Страница: 121 / 213

Chapter 6: UEFI BIOS

121

•

Current firmware version:

This feature displays the current firmware version.

•

Selected firmware version:

This feature allows the user to select a new firmware

version to use.

•

File:

This feature allows the user to specify the file path in the root directory that contains

the new firmware for firmware update.

•

Staged firmware version:

This feature indicates the staged firmware version of the

DCPMM module specified by the user.



Update

Select this feature to update the firmware settings.



Back to main menu

Select this feature and press <Enter> to go back to the

Intel(R) Optane(TM) DC Per-

sistent Memory Configuration

menu.



Configure security

Use this feature to configure the security settings for all onboard DCPMM modules.

State:

Select Enabled to configure the security settings for the DCPMM modules installed in

the system. The options are

Disabled

and Enabled.

•

Enable security:

Use this feature to enable security settings for the onboard DCPMM

modules.

•

Secure erase:

Use this feature to erase all the persistent data saved in the DCPMM

modules.

•

Freeze lock:

Use this feature to enable the security lock for the onboard DCPMM

modules.



Back to main menu

Select this feature and press <Enter> to go back to the

Intel(R) Optane(TM) DC Per-

sistent Memory Configuration

menu.



Back to main menu

Select this feature and press <Enter> to go back to the

Intel(R) Optane(TM) DC Per-

sistent Memory Configuration

menu.

Содержание SuperStorage SSG-1129P-ACR10N4L






















































































































































































































Результаты поиска

Содержание SuperStorage SSG-1129P-ACR10N4L

Отзывы:

Похожие инструкции для SuperStorage SSG-1129P-ACR10N4L

Бренды по названию

Популярные бренды

Supermicro SuperStorage SSG-1129P-ACR10N4L, Руководство пользователя

Результаты поиска

Содержание SuperStorage SSG-1129P-ACR10N4L

Отзывы:

Похожие инструкции для SuperStorage SSG-1129P-ACR10N4L

Бренды по названию

Популярные бренды