104
SuperStorage SSG-1129P-ACR10N4L User's Manual
sSATA Port 0 ~ sSATA Port 5
Hot Plug
Select Enable to support Hot-plugging for the device installed on an sSATA port specified by
the user which will allow the user to replace the device installed in the slot without shutting
down the system. The options are Disabled and
Enable
.
Spin Up Device
This setting allows the SATA device installed on the SATA port specified by the user to
start a COMRESET initialization when an edge is detected from 0 to 1. The options are
Disable
and Enable.
sSATA Device Type
Use this feature to specify if the device installed on the sSATA port specified by the user
should be connected to a Solid State drive or a Hard Disk Drive. The options are
Hard
Disk Drive
and Solid State Drive.
PCIe/PCI/PnP Configuration
The following information is displayed:
•
PCI Bus Driver Version
PCI Devices Common Settings:
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Disabled and
Enabled
.
SR-IOV Support (Available if the system supports Single-Root Virtualization)
Select Enabled for Single-Root IO Virtualization support. The options are
Disabled
and
Enabled
.
ARI Support
Select Enabled for the Alternative Routing ID Interpretation support The options are Disabled
and
Enabled.
MMIO High Base
Use this feature to select the base memory size according to memory-address mapping for
the IO hub. The base memory size must be between 4032G to 4078G. The options are
56T
,
40T, 24T, 16T, 4T, 2T, and 1T.
MMIO High Granularity Size
Use this feature to select the high memory size according to memory-address mapping for
the IO hub. The options are 1G, 4G, 16G, 64G,
256G
, and 1024G.