Supermicro SuperStorage Server 6048R-E1CR90L, Руководство пользователя

Страница: 34 / 137

SuperStorage Server 6048-E1CR90L User's Manual
34
3.3 Motherboard Components
Processor and Heatsink Installation
Follow the procedures in this section to install a processor (CPU) and heatsink to the
motherboard.
Notes:
•
The motherboard should be installed into the chassis first and the processor should be
installed into the CPU socket before you install a CPU heatsink.
•
If you bought a CPU separately, make sure that you use an Intel-certified multi-directional
heatsink only.
•
When receiving a motherboard without a processor pre-installed, make sure that the plastic
CPU socket cap is in place and none of the socket pins are bent; otherwise, contact your
retailer immediately.
•
Refer to the Supermicro website for updates on CPU support.
Installing the Processor(s)
If the system is powered on, remove power as described in Section 3.1.
1. There are two levers on the LGA 2011 socket. First press and release the load lever
labeled "Open 1st".
2. Press the second load lever labeled "Close 1st" to release the load plate from its locked
position.
Release the lever labeled "Open 1st"
OPEN 1s
t
OPEN 1s
t
Release the lever labeled "Close 1st"