91
Chapter 6: Optional Components
Creating NVMe RAID Configurations
1. Open
Advanced > Intel(R) Virtual RAID on CPU > All Intel VMD Controllers >
Create RAID Volume
.
2. Set
Name
.
3. Set
RAID Level
.
4. If cross-controller RAID is required, select
Enable RAID spanned over VMD
Controller
.
5.
Select specific disks for RAID with an [X].
•
RAID0: Select at least two [2 - 24] disks
•
RAID1: Select only two disks
•
RAID5: Select at least three [3 - 24] disks
•
RAID10: Select only four disks
6. Select
Strip Size
(Default 64KB).
7. Select
Create Volume
.
8. If another RAID is needed, start again at step 1.
Figure 6-13. Created Volume
without
enabling RAID spanned over VMD
controller
Figure 6-14. Created Volume
with
enabling RAID spanned over VMD
controller
