45
Chapter 3: Maintenance and Component Installation
3.10 Expansion Cards
The SYS-510T-WTR includes two riser cards to support the use of expansion (add-on) cards.
Before following the procedure below to install expansion cards, first turn off and remove
power from the system as described in section 3.1 then remove the top cover.
Figure 3-12. Expansion Card Chassis Slots
Riser Cards
This system include riser cards that provide PCIe capabilities.
PCIe Slots per Riser Card
Riser Card
Part Number
Slot Description
Right (from rear)
RSC-W-68G4
1
2
PCIe 4.0 x16 or x8 (auto switch) FHFL auto-switching
PCIe 4.0 x0 or x8 (auto switch) FHFL auto-switching
Middle (from rear) RSC-R1UW-E8R
3
PCIe 3.0 x4 (in x8) LP
Full-height = 4.2", Low-profile = 2.5", Full-length = 10.5", Half-length = 6.6"
1
3
2
