manualshive.com logo in svg

Supermicro SuperServer SSG-520P-ACTR12H, Руководство пользователя

Поделиться
Скачать
Supermicro SuperServer SSG-520P-ACTR12H Скачать руководство пользователя страница 3

3

Preface

3

Preface

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It provides 
information for the installation and use of the server. Installation and maintenance should be 
performed by experienced technicians only.

Please refer to the SSG-520P-ACTR12(L/H) server specifications page on our website for 

updates on supported memory, processors and operating systems (

http://www.supermicro.

com

).

Notes

For your system to work properly, please follow the links below to download all necessary 
drivers/utilities and the user’s manual for your server.

• 

Supermicro product manuals: 

http://www.supermicro.com/support/manuals/

• 

Product drivers and utilities: 

https://www.supermicro.com/wdl

• 

Product safety info: 

http://www.supermicro.com/about/policies/safety_information.cfm

If you have any questions, please contact our support team at: 

[email protected]

This manual may be periodically updated without notice. Please check the Supermicro website 
for possible updates to the manual revision level.

Secure Data Deletion

A secure data deletion tool designed to fully erase all data from storage devices can be found 
on our website: 

https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wdl/utility/

Lot9_Secure_Data_Deletion_Utility/

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! 

Indicates high voltage may be encountered when performing a procedure.

Warning! 

Indicates important information given to prevent equipment/property damage 

or personal injury.

Содержание SuperServer SSG-520P-ACTR12H

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды