Supermicro Superserver MicroCloud 5038MA-H24TRF, Руководство пользователя

Страница: 47 / 108

Chapter 5: Advanced Serverboard Setup
5-3
Caution! Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage to the DIMMs or their sockets
How to Install Memory
1. Install the desired number of DIMMs into the memory slots, starting with DIM-
MA1, then DIMMB1, then DIMMA2, then DIMMB2. Pay attention to the notch
along the bottom of the module to prevent incorrect DIMM module installation.
2. Insert each DIMMs module vertically and snap it into place. Repeat step 1
until you complete the memory installation. See the section below for more
details on DIMM memory installation.
3. Insert only memory modules of the same type, frequency and capacity on
each serverboard.
Installing DIMM Memory Modules
1. Align the key on the bottom of the DIMM module against the receptive point
on the memory slot. Take note of the notches on the side of the DIMM mod-
ule, and of the locking clips on the socket to avoid causing damage.
Module Notch
Module Key
Socket Key
5-6 Installing Memory
2. Install the DIMMs module straight down into the socket until it is securely
seated in the socket. The side clips will automatically lock the module into
place.
Side Clips