Supermicro Superserver MicroCloud 5038MA-H24TRF, Руководство пользователя

Страница: 62 / 108

6-4
S
UPER
S
ERVER 5038MA-H24TRF User's Manual
6-4 Removing and Installing Sleds
Figure 6-3. Removing/Installing a Sled
The system features twelve removable sleds. Each sled (consisting of two nodes)
contains an individual serverboard and hard drives. The sleds allow the nodes
to easily be installed and removed from the chassis while the rest can remain
operational.
Removing Sleds from the System
1. Power-down the two nodes on a sled by pressing the power button on the
sld's control panel.
2. Press and hold down the release tab on the back of the sled.
3. Use the sled's handle to pull the it from the chassis.
Warning: Except for short periods of time while swapping sleds, do not operate the
server with the sled bays empty. In the event of a node failure, remove the sled of
the failed node and replace it with a dummy sled that was included with the system.
Release Tab
Handle