50
SuperServer E50-9AP User's Manual
Device Settings
This item displays the base I/O port address and the Interrupt Request address of a serial
port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 1. Select
Auto to allow the BIOS to automatically assign the base I/O and IRQ address
to a serial port specified. The options are
Auto
, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4,
5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
COM Port Mode
Use this item to select the COM port mode. The options are
RS232 Mode
, RS422 Mode,
and RS485 Mode.
Serial Port 2 Configuration
Serial Port
Select Enabled to enable the onboard serial port specified by the user. The options are
Disabled and
Enabled
Device Settings
This item displays the base I/O port address and the Interrupt Request address of a serial
port specified by the user.
Change Port Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 2. Select
Auto to allow the BIOS to automatically assign the base I/O and IRQ address
to a serial port specified. The options are
Auto
, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4,
5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
COM Port Mode
Use this item to select the COM port mode. The options are
RS232 Mode
, RS422 Mode,
and RS485 Mode.
Hardware Monitor
PC Health Status
•
Peripheral temperature
•
System temperature
