54
SuperServer E403-9P-FN2T User's Manual
SATA and SAS Ports
The X11SPW-CTF/-TF has eight I-SATA 3.0 ports and two S-SATA 3.0 ports that are supported
by the Intel C622 chipset. In addition to the SATA 3.0 ports, the X11SPW-CTF has four SAS
3.0 ports that are supported by the LSI 3008 controller.
M.2 Slot
M.2 is formerly known as Next Generation Form Factor (NGFF). The M.2 slot is designed for
internal mounting devices. The X11SPW-CTF/-TF motherboard deploys an M key dedicated
for SSD devices with the ulitmate performance capability in a PCIexpress 3.0 x4 interface
for native PCIe SSD support. It can also support SATA devices.
NVMe I
2
C Header
Connector JNVI
2
C1 is a management header for the Supermicro AOC NVMe PCIe peripheral
cards. Connect the I
2
C cable to this connector.
Note:
When installing an NVMe device on the motherboard, connect the first NVMe port
(JNVI
2
C1) first for your system to work properly.
Power LED/Speaker
Pins 1-3 of JD1 are used for power LED indication, and pins 4-7 are for the speaker. Please
note that the speaker connector pins (4-7) are used with an external speaker. If you wish to
use the onboard speaker, you should close pins 6-7 with a cap.
Speaker Connector
Pin Definitions
Pin#
Definition
4
P5V
5
Key
6
R_SPKPIN_N
7
R_SPKPIN
PWR LED Connector
Pin Definitions
Pin#
Definition
1
JD1_PIN1
2
FP_PWR_LED
3
FP_PWR_LED
