58
SuperServer E302-9A User's Manual
NonVolatile Memory Setup
Method
Use this feature to select how data will be saved after power loss. The options are
Dis-
abled
and NVDIMM.
*If the feature above is set to NVDIMM, the following items will become available
for configuration:
SoC Pwr Loss Support
Use this feature to enable the internal detection of an Asynchronous DRAM Refresh
(ADR) entry instead of a CPLD. The options are
Disabled
and Enabled.
Cache Flushing
Use this feature to select the amount of cache that should be flushed. The options are
MemCtrlr only
and L1, L2 and MemCtrlr.
ADR State Source
Use this feature to select whether the ADR State source is internal or external. The op-
tions are
external
and internal.
Internal Pwr Loss Event Setup
SoC Pwr Loss Support
The feature is always
Disabled
.
PMC Reset
Enable this feature to receive a notification when there is a global reset because of an
SMBus slave power down. The options are Disabled and
Enabled
.
Power Button Override
When this feature is set to Enabled, it sends a notification when there is a power but
-
ton override. The options are Disabled and
Enabled
.
ME Pwr Button Override
When this feature is set to Enabled, it sends a notification when ME initiates the Power
Button Override. The options are Disabled and
Enabled.
ME WDT
When this feature is Enabled, it sends a notification when the ME watchdog timer
expires. The options are Disabled and
Enabled
.
