34
Chapter 3: Maintenance and Component Installation
3. Place the drive into the tray and secure it to the tray with the screws provided with the
drive.
4. Return the drive tray assembly into the chassis, aligning the tabs of the tray with the
slots in the chassis. Secure the tray to the chassis support bracket with the screws
previously set aside.
Figure 3-4. Installing the Hard Drive
5. Attach the SATA cable from the drive to the SATA port on the motherboard. This cable
carries both the SATA signal and the SATA power.
6. Reinstall the chassis cover and power up the system.
