Supermicro SuperServer E200-8D, Руководство пользователя

Страница: 62 / 107

62
SuperServer E200-8D User's Manual
Maximum Payload
Use this feature to select the setting for the PCI Express maximum payload size. The options
are
Auto , 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
Relaxed Ordering
Select Enable to enable Relaxed Ordering support which will allow certain transactions to
violate the strict-ordering rules of PCI bus for a transaction to be completed prior to other
transactions that have already been enqueued. The options are Enabled and
Disabled .
Extended Tag
Use this item to allow a device to use the 8-bit tag field as a requester. The options are
Disabled
and Enabled.
ARI Forwarding
When this feature is enabled, the Downstream Port disables its traditional device number to
0 when turning Type1 Configuration Request into a Type0 Configuration Request. The default
value is Disabled .
M.2 PCI-E 3.0 X4 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy , and EFI.
SLOT 7 PCI-E 3.0 X16 Bifurcation
Use this feature to set the PCI-E slot to operate as a single x16 slot or to bifurcate into two
x8 slots. A proper riser card must be used to take advantage of bifurcation. The options are
x8x8 and
x16 .
SLOT 7 PCI-E 3.0 X16 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy , and EFI.
Onboard LAN Option ROM Type
Use this option to enable Option ROM support to boot the computer using a network device
specified by the user. The options are
Legacy
and EFI.
Onboard LAN1 Option ROM
Use this option to select the type of device installed in LAN Port 1 used for system boot. The
options are Disabled,
PXE , and iSCSI.
Onboard LAN2 Option ROM
Use this option to select the type of device installed in LAN Port 2 used for system boot. The
options are
Disabled and PXE.