Supermicro SUPERSERVER 6036ST-6LR, Руководство пользователя, Страница: 75 / 110

Chapter 6: Advanced Chassis Setup
6-7
Figure 6-5. Removing the Dummy Drive from the Carrier
Drive Carrier
Dummy Drive
1 1
1 1
1 2
Figure 6-6. Installing a Drive to a Carrier
1
4
1
4
1
3
Installing a SAS/SATA Hard Drive (Figures 6-5 and 6-6)
1. Remove the screws securing the dummy drive to the drive carrier.
2. Remove the dummy drive. Place the carrier on a fl at surface.
3. SATA drives only: install an AOC-LSISS9252 interposer add-on card into the
carrier.
4. Slide the hard drive into the carrier with the printed circuit board side down.
5. Carefully align the mounting holes in both the drive tray and the hard drive.
6. Secure the hard drive to the tray using the screws provided.
7. Insert the drive carrier into the chassis. Make sure to close the carrier handle
to lock the carrier into place.