Supermicro SUPERSERVER 6036ST-6LR, Руководство пользователя, Страница: 23 / 110

Chapter 2: Server Installation
2-9
2-7 Checking the Drive Bay Setup
Next, you should check to make sure the peripheral drives and the SAS/SATA drives
have been properly installed and all connections have been made.
Checking the Drives
1. The hard drives can be installed and removed from the front of the chassis
without removing the top chassis cover.
2. Depending upon your system's con fi guration, your system may have one or
more drives already installed. If you need to install hard drives, please refer to
Chapter 6.
Checking the Airfl ow
1. Air fl ow is provided by 4-cm counter-rotating fans. The system component
layout was carefully designed to direct suf fi cient cooling air fl ow to the compo-
nents that generate the most heat. See Chapter 6 for details.
2. Note that all power and data cables have been routed in such a way that they
do not block the air fl ow generated by the fans.
Providing Power
1. Plug the power cord(s) from the power supply unit(s) into a high-quality power
strip that offers protection from electrical noise and power surges. It is recom-
mended that you use an uninterruptible power supply (UPS).
2. Depress the power on button on the front of the chassis.