Supermicro SUPERSERVER 6027R-CDNRT+, Руководство пользователя

Страница: 63 / 128

Chapter 5: Advanced Serverboard Setup
5-15
5-8 Connector Definitions
Power LED
The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin definitions.
ATX Power Connector
The 24-pin main power connector
(JPW1) is used to provide power to
the serverboard. Two 8-pin power
connectors (JPW2/3) are also re-
quired for processor power (below).
These power connectors meet the SSI
EPS 12V specification. See the table
on the right for pin definitions.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin definitions.
NMI Button
Pin Definitions (JF1)
Pin# Definition
19 Control
20 Ground
Processor Power
Pin Definitions
Pins Definition
1 through 4 Ground
5 through 8 +12V
Power LED
Pin Definitions (JF1)
Pin# Definition
15 3.3V
16 PWR LED
Processor Power Connectors
JPW2 and JPW3 must also be con-
nected to the power supply to provide
power for the processor(s). See the
table on the right for pin definitions.
ATX Power 24-pin Connector
Pin Definitions
Pin# Definition Pin # Definition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. These pins
are used to display hard drive activity.
Refer to the table on the right for pin
definitions.
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 P3V3_LED_SW
14 HD Active