Supermicro SUPERSERVER 6022P-8R, Руководство пользователя

Страница: 17 / 106

Chapter 2: Server Installation
2-1
Chapter 2
Server Installation
2-1 Overview
This chapter provides a quick setup checklist to get your SuperServer
6022P-8R/6022P-8 up and running. Following these steps in the order given
should enable you to have the system operational within a minimum amount
of time. This quick setup assumes that your SuperServer 6022P-8R/6022P-
8 system has come to you with the processors and memory preinstalled. If
your system is not already fully integrated with a motherboard, processors,
system memory etc., please turn to the chapter or section noted in each
step for details on installing specific components.
2-2 Unpacking the SuperServer 6022P-8R/6022P-8
You should inspect the box the SuperServer 6022P-8R/6022P-8 was
shipped in and note if it was damaged in any way. If the server itself
shows damage you should file a damage claim with the carrier who deliv-
ered it.
Decide on a suitable location for the rack unit that will hold the SuperServer
6022P-8R/6022P-8. It should be situated in a clean, dust-free area that is
well ventilated. Avoid areas where heat, electrical noise and electromag-
netic fields are generated. You will also need it placed near a grounded
power outlet. Read the Rack and Server Precautions in the next section.
2-3 Preparing for Setup
The box the SuperServer 6022P-8R/6022P-8 was shipped in should include
two sets of rail assemblies, two rail mounting brackets and the mounting
screws you will need to install the system into the rack. Follow the steps
in the order given to complete the installation process in a minimum amount
of time. Please read this section in its entirety before you begin the instal-
lation procedure outlined in the sections that follow.