Supermicro SUPERSERVER 6022P-8R, Руководство пользователя

Страница: 19 / 106

Chapter 2: Server Installation
2-3
2-4 Installing the 6022P-8R/6022P-8 into a Rack
This section provides information on installing the SuperServer 6022P-8R/
6022P-8 into a rack unit. If the 6022P-8R/6022P-8 has already been
mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. There
are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. The following is a guideline for installing the
6022P-8R/6022P-8 into a rack with the rack rails provided. You should
also refer to the installation instructions that came with the rack unit you
are using.
Identifying the Sections of the Rack Rails:
You should have received two rack rail assemblies with the SuperServer
6022P-8R/6022P-8. Each of these assemblies consist of three sections: an
inner fixed chassis rail that secures to the 6022P-8R/6022P-8 (A) and an
outer fixed rack rail that secures directly to the rack itself (B). A sliding rail
guide sandwiched between the two should remain attached to the fixed
rack rail. (See Figure 2-1.) The A and B rails must be detached from each
other to install.
To remove the fixed chassis rail (A), pull it out as far as possible - you
should hear a "click" sound as a locking tab emerges from inside the rail
assembly and locks the inner rail. Then depress the locking tab to pull
the inner rail completely out. Do this for both the left and right side rack
rail assemblies.
Figure 2-1. Identifying the Sections of the Rack Rails
A
B