Supermicro SUPERSERVER 6013P-8 Plus, Руководство пользователя

Страница: 50 / 108

5-14
S
UPERSERVER 6013P-8+ User’s Manual
Extra Universal Serial Bus
Headers (FPUSB0/1)
Two additional USB headers des-
ignated FPUSB0 and FPUSB1 are
i n c l u d e d o n t h e s e r v e r b o a r d .
These are included for connection
to the ports on the front of the
chassis. A USB cable (not in-
cluded) is needed. See the table
on the right for pin definitions.
Power Button
The Power Button connection is
located on pins 1 and 2 of JF2.
Momentarily contacting both pins
will power on/off the system. This
button can also be configured to
function as a suspend button (see
the Power Button Mode setting in
B I O S ) . T o t u r n o f f t h e p o w e r
when set to suspend mode, de-
press the button for at least 4
seconds. Refer to the table on the
right for pin definitions.
P in
Number
1
2
Definition
PW _O N
G round
P ow er Butto n
Connector
P in Definitions
(JF2)
Universal Serial Bus
(USB0/1)
Two Universal Serial Bus ports
are located beside the PS/2 key-
board/mouse ports. USB0 is the
bottom connector and USB1 is the
top connector. See the table on
the right for pin definitions.
Universal Serial Bus Pin Definitions
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 Ground
5 N/A
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 Ground
5 Key
USB0
USB1
Front Panel Universal Serial Bus Pin
Definitions
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 Ground
5 N/A
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 Ground
5 Key
FPU SB0
FPU SB1