Supermicro SUPERSERVER 6012P-i, Руководство пользователя

Страница: 49 / 102

Chapter 5: Advanced Motherboard Setup
5-15
Extra Universal Serial Bus
Headers
E x t r a U S B h e a d e r s ( F P U S B 0 /
FPUSB1) can be used for front
side USB access. You will need a
USB cable (not included) to use
either connection. Refer to the
table on the right for pin defini-
tions.
Front P anel Universal Serial Bus Pin
Definitions
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 G round
5 N/A
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 G round
5 Key
USB2/F PUSB0
USB3/FP USB1
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and the
PS/2 mouse are located on J29.
See the table on the right for pin
definitions. (The mouse port is
green and the keyboard port is
purple. See Figure 2-3.)
P S /2 Keyboard
and M ouse P ort
P in Definitions
(J29)
P in
Num ber
1
2
3
4
5
6
Definition
Data
NC
Ground
V CC
Clock
NC
Serial Ports
The COM1 serial port is located
under the parallel port (see Figure
2-3). See the table on the right for
pin definitions. The COM2 connec-
tor is a header located near the
PCI-X #1 slot on the motherboard.
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1 DCD
2 DSR
3 Serial In
4 RTS
5 Serial Out
Pin Number Definition
6 CTS
7 DTR
8 RI
9 G round
10 NC
LAN1/2 (Gb Ethernet Ports)
Two Gb Ethernet ports (desig-
nated LAN1 and LAN2) are located
beside the VGA port on the IO
backplane. These ports accept
RJ45 type cables.