Supermicro SUPERSERVER 6012P-i, Руководство пользователя

Страница: 3 / 102

Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the Super-
Server 6012P-i. Installation and maintainance should be performed by ex-
perienced technicians only.
The SuperServer 6012P-i is a dual Xeon processor 1U rackmount server
based on the SC812L-P 1U rackmount server chassis and the P4DPR-iG2
motherboard, which supports single or dual Xeon 512K L2 cache proces-
sors of up to 2.4+ GHz at a Front Side (system) Bus speed of 400 MHz and
up to 12 GB of DDR-200 (PC1600) SDRAM memory.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the SUPER P4DPR-
iG2 mainboard and the SC812L-P chassis, which make up the SuperServer
6012P-i.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
6012P-i into a rack and check out the server configuration prior to powering
up the system. If your server was ordered without processor and memory
components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.
iii
Preface