Supermicro SUPERSERVER 6012P-i, Руководство пользователя

Страница: 14 / 102

S
UPER
S
ERVER 6012P-i Manual
1-4
Processors
The P4DPR-iG2 supports single or dual Intel Xeon 512K L2 cache proces-
sors of up to 2.4 GHz and faster at a 400 MHz FSB. Please refer to the
support section of our web site for a complete listing of supported proces-
sors (http://www.supermicro.com/TechSupport.htm).
Memory
The P4DPR-iG2 has 6 184-pin DIMM slots that can support up to 12 GB of
registered ECC DDR-200 (PC1600) SDRAM. Module sizes of 128 MB, 256
MB, 512 MB, 1 GB and 2 GB may be used to populate the DIMM slots. (DDR-
266 is also supported, but only at a speed of 200 MHz.)
PCI Expansion Slots
The P4DPR-iG2 has one 64-bit, 133/100 MHz PCI-X slot and one slim 64-bit,
66 MHz PCI-X slot. Two riser cards are included with the server. The CSE-
RR1U-XLP riser card fits into the 133/100 MHz PCI-X slot and supports the
use of one standard PCI card. The CSE-RR1U-X riser card fits into the slim
66 MHz PCI-X slot and supports the use of one low-profile PCI card. Two
jumpers on the motherboard can be used to change the speed of these
slots if needed (see Chapter 5).
ATI Graphics Controller
The P4DPR-iG2 features an integrated ATI video controller based on the
Rage XL graphics chip. Rage XL fully supports sideband addressing and
AGP texturing. This onboard graphics package can provide a bandwidth of
up to 512 MB/sec over a 32-bit graphics memory bus and includes 8 MB of
memory.
Onboard Controllers/Ports
The P4DPR-iG2 includes one floppy drive controller and two onboard IDE
controllers, which support up to four hard drives or ATAPI devices.
Backpanel I/O ports include one COM port, two USB ports, PS/2 mouse and
keyboard ports, a video (monitor) port and an Intel Gigabit Ethernet control-
ler that supports two Gb LAN ports.